Audio Analyzer Type BK2110
The Audio Device Tester:
The BaKo BK2110 Audio Analyzer is a 2 channel Digital Signal
Processing (DSP) based system so you can analyze a stereo signal
from an acoustic device. And because it is DSP based, it can
quickly and accurately test high quality digital audio devices. All
test items can be measured simultaneously and you can see them
in real time or, using the LAN interface, send them to a computer
system to analyze.
If you'd like some more information, email me here
If you'd like some more information, email me here
NEXT
Specifications:
General:
Input Channels: 2 Independent Ch
Display: 20x 4 VFD
Key Pad: 10 Button SW
Input Channel:
Input Mode: Voltage, ICP
Input Range: 10mV to 10V 10dB Step
Input Impedance: 1MΩ
Input Ground: Single Ended
Max. Input Voltage: 40Vp-p
Connector Type: BNC
Frequency Response: 20Hz to 22kHz at 0.1dB
Channel Amplitude Mismatch: Max. 0.1dB
Overload Detection: Yes
Dynamic Range: > 96dB
Auto Range: Yes
Signal Monitoring: Yes
Sensor Interface: ICP Type Microphone or Accelerometer
ICP Power:
Power Voltage: 24V
Driving Current: 4mA
Measuring Parameters:
AC Level: 0 – 10V 0.1dB
Frequency: 20Hz – 20kHz
THD: 0.01 – 90%
S/N: < 95dB
SINAD: 0 – 95dB
Channel Separation: < 95dB
Noise Level: > -110dB A-Weight at 600Ω Source Impedance
NEXT
Signal Processing:
Sampling Frequency: Max. 48kHz (each Channel)
ADC: 16bit
Frequency Range: 20Hz – 20kHz
Display Mode:
Single Channel Mode: Function Parameter, Frequency, Level
Dual Channel Mode: Frequency, Level
Scale: Lin (V), dBV
dB Reference Function: Yes
Engineering Unit and Sensitivity: Yes
PC Interface:
Port: 100 Mbps LAN
Control Commands: Full remote control possible via PC command
PC Control Program available (Option)
Calibration:
Auto Input / Output Sensitivity Calibration: Yes
Power:
AC 90 - 220V, 50/60Hz
Max. 1A
Dimensions:
330m x 72m x 275m(W,H,D)
3kg