Compression Unit Type BK1611
The Compression Unit:
The BaKo BK1611 is a Compression Unit that uses a real time
feedback loop to create a frequency sweep with constant
level output. This would normally be used for either research
or for calibration rather than product line testing and is
useful because of its extreme stability. The BK1611 is not
a dedicated system so it can be integrated into a variety
of systems to be used for microphones, speakers or vibration
motors.
If you'd like to know more, or are interested in designing a system for your products, email me for more information.
If you'd like to know more, or are interested in designing a system for your products, email me for more information.
NEXT
Specifications:
General:
Input Channels: 2 Independent Ch
Dimensions: 330 x 72 x 275(W,H,D)
AC 90 - 220V, 50/60Hz
Max. 3Å
OK/NG display box (Option)
Foot switch for handsfree use
Input Channel:
Input Mode: Voltage, ICP
Input Range: 10mV to 10V 10dB Step
Input Impedance: 100kΩ
Input Mode: Voltage, ICP
Input Ground: Single Ended
Max. Input Voltage: 40Vp-p
Connector Type: BNC
Frequency Response: 20Hz to 48kHz at ±0.1dB)
Channel Amplitude Mismatch: Max. 0.1dB
Overload Detection: Yes
Dynamic Range: > 96dB
Auto Range: YES
Signal Monitoring: YES (Option)
Sensor Interface: ICP Type Microphone or Accelerometer
Sampling Frequency: Max. 48kHz (each Channel), (96kHz Option)
ADC: 16bit (24Bit Option)
Frequency Range: 20 Hz to 48kHz
Acoustic Weight Filter: Lin, A
NEXT
ICP Power (Microphone Power):
Power Voltage: 24V
Driving Current: 4mÅ
Generator & Power Amplifier:
Signal Mode:
Fixed Sine 10Hz to 48kHz
Sweep Sine 10Hz to 48kHz
Multi Tone: Max. 99 Tones (option)
Random Signal (option)
Signal Level: 1mV to 1V rms
Amplitude Error: ±0.1dB 20Hz to 40kHz
Power Amplifier:
Max. Power: 10W at 8O
Load: > 4O
Compressing Unit
Frequency Range: 200Hz to 48kHz
Level Range: 60dB
Calibration:
Auto Input/Output Sensitivity Calibration: Yes