Earbud Tester Type BK2132
The Earbud Tester:
When you don't need the full power of a
BK2120A speaker tester,
then the more portable BK2132 might be what you
are looking for. This little machine is based on
the more sophisticated system but it provides only
basic testing. It is very fast and easy to set
up and use and is especially portable as well,
all for a lower price.
If you need a more thorough test with detailed graphs and data you can track over time, take a look at the BK2120A. But if all you need is a quick impedance check and a short check at 3 sensitivity bands, contact me here; the BK2132 might be just what you need.
If you need a more thorough test with detailed graphs and data you can track over time, take a look at the BK2120A. But if all you need is a quick impedance check and a short check at 3 sensitivity bands, contact me here; the BK2132 might be just what you need.
NEXT
Specifications:
General:
Input Channel: 1 Independent Channel
Display: 40x 2 VFD
Keypad: 4 Buttons, 1 Knob
Input Range: 0 ~ 5V Vdc
Input Impedance: 1MΩ
Input Ground: Single Ended
0.01V Stepped DC Voltage Control for Digital Microphone
1.2MHz/2.4MHz/2.8224 Digital Microphone Operation Clock Select
3-bands Sound (Signal) Output
3-bands Sensitivity
Consumption Current
Coupler Calibration
System Calibration (ADC Sensitivity, Current, DC Voltage)
Signal Processing
Sampling Frequency: Max. 44.1Hz
ADC :24bit
Frequency Range: 20Hz to 20kHz