MEMS Testing System Type BK3010V2
The MEMS Mic Tester:
The BaKo BK3010V2 is our updated MEMS Tester, based on
our C-Mic tester, the best
selling BK3010. It's small
enough to carry under your arm and with a test time
of under 0.5 seconds, it tests as fast as you can
connect a microphone. Setting up the specifications
is very easy and can be done in a few minutes. In
addition, the new BK3010V2 can be connected to a
computer so you can keep and view compiled data and
track trends in variations in your C-Mics.
If you'd like to know more, drop me a line.
If you'd like to know more, drop me a line.
NEXT
Specifications:
Measurement:
Input range: 10dB (3.15Vrms) ~ -40dB (10mVrms) in
20dB step manual range set up
Frequency Range: 50Hz~16kHz (1/3 Octave)
Full Range Accuracy: ±0.1dB (at 1kHz)
Full Frequency Scale accuracy: ±0.1dB (Relative at 1kHz)
Measurement Rate:
10 updates/sec (Fast Mode)
5 updates/sec (Normal Mode)
C-Mic. power range: DC 0 ~ 5V
C-Mic. power accuracy: ±0.01V
Current range: 0 ~ 900µÅ
Generator:
Power: 2W/ channel (Max.)
Source Type: 3 band mixed sine
Frequency range: 50 ~ 16kHz (1/3 Oct.)
Frequency accuracy: 0.1%
Level stability: 0.05% (at -30dBV)
Amplitude range: AC 1V Peak
DC offset: ±15mV)
T.H.D (Total Harmonic Distortion): 0.2% (at 1W)
NEXT
PLC Interface:
Port: 12 output (Open Collector), 4 input (Contact Point)
Signal level: 24V (Max., when Ext. power used)
Auto mode: Test End, Ext. Test Start, Test Result (BDC Code)
Manual mode:
OK: RANK_1 ~ 10
NG: 6-7 Types,
OPN (Open)
SHT (Short)
IDO
SEN (Sensitivity)
OVR (Over)
H_F (High FRQ)
L_F (Low FRQ)
PC Interface:
LAN: 100Mbps
2 channel signal analyzer: Option
2 channel test report to Excel and Text: Option
AC Power:
220V 50 ~ 60Hz