Multi Channel Vibration Motor Aging Tester Type BK2022
The Vibration Motor Ager:
The BK2022 is the ultimate in aging testing for coin type
vibration motors. You can connect up to 128 motors and the
system will automatically test them all at the same time. It
tests RPM, current, individual errors, and even total error
and puts the information on the monitor in real time. You
can store the results and retrieve them later to be analyzed
so you can keep track of the accuracy and stability of your
manufacturing process. In addition, BaKo’s BS1123-BS2022
program will be modified to fit your needs so that the testing
you do is a custom fit. If you'd like to know more about our
vibration motor aging system,
email
me.
And if you need an extra sensor for testing, ask about our BK8018A Vibration Motor Ager. This is similar to the BK2022 but because it gets additional data from a sensor on the jig, not only provides a double check, but can produce reliable information for bar type motors as well as for coin type motors..
And if you need an extra sensor for testing, ask about our BK8018A Vibration Motor Ager. This is similar to the BK2022 but because it gets additional data from a sensor on the jig, not only provides a double check, but can produce reliable information for bar type motors as well as for coin type motors..
NEXT
Specifications:
General:
Channel: Max.128Ch
Measurement Method: 8Ch Independent [Real Time]
Limit Setup: RPM, Average Current, On/Off Time,
Count, Error Count
Auto Test Control: Yes
Signal Output: DC Current Output via BNC
Connector 8Ch (Rear)
Vibration Motor DC Power Supply:
DC Power Voltage: 0 – 5.00[V]
Current Measurement Mode: Average Current
Current Measurement Range: 0 – 270[mÅ]
Current Measurement Accuracy: 0.5% of Full Scale
DC Power On/Off Control: via Keypad
Measurement Time:
On/Off Time: User Setting
RPM Measurement Minimum Time: 600mSec [DSP
Processing Time]
Current Measurement Range: 0 – 270[mÅ]